Healthcare Medico Unit Assemblies
Home / Healthcare Medico Unit Assemblies
Clinical Utility
|
 |
This boxed out unit incorporates a clinical
wash hand basin and TMV3 thermostatic
sequential mixer. The unit is custom
manufactured to project out adjacent
to solid or partition walls and integrate
into suspended or solid ceilings whilst
encasing all services and waste pipes
to the rear of the panelling. |
 |
|
TMV3 Approved Thermostatic DO8 Tap HTM - DH REF LBHM TBH2A
|
|
Caremix Thermostatic Taps
|
Sola Spectrum 500
|
 |
 |
The Caremix® T3 is a sequential D08
approved thermostatic tap typically
used in areas with a panel system
where the tap is mounted on a wall
or panel with a void behind which
carries the service pipework as is
common in many commercial sites.
The Caremix® T3 tap is perfectly suited
for high risk environments like hospitals
or nursing homes to preven vulnerable
people from being scalded by hot
water. The tap is designed for ease
of operation and installation and
incorporates isolation, filtration, check
valves and flow regulators in the
design of the body. |
- Hospital Pattern Basin
- Integral back outlet
- No plug, hole or overflow
- Panel mounted basin
|
 |
- Pre plumbed factory tested
- Easy installation
- Hinged lockable access panels
- Made to order
|
Non Clinical Utility
|
 |
This boxed out unit incorporates a non
clinical wash hand basin and lever
operated thermostatic mixer tap for
use on single tap hole basins. The unit
is custom manufactured to project out
adjacent to solid or partition walls and
integrate into suspended or solid
ceilings while encasing all services and
waste pipes to the rear of the panelling. |
 |
TMV3 APPROVED THERMOSTATIC MIXING DO8 TAP HTM –
DH REF GM/LBGL TP6
|
|
Caremix Thermostatic Taps
|
Sola Medical 500/600
|
 |
2 tap hole 25mm – 1 tap basin 32mm

|
|
The Caremix® S3 a sequential D08 approved
thermostatic tap for use on single hole basins
in high risk environments like hospitals or
nursing homes to prevent vulnerable people
from being scalded by hot water. The tap is
designed for ease of operation and installation
and is supplied complete with combination
valves incorporating isolation, filtration, check
valves and flow regulators. |
- Non clinical hospital pattern basin
- No overflow, no chainstay
- Panel mounted basin
- Available in 500 – 600mm width
- For 2 tap hole basins, temperature reducer is required to prevent scalding from hot water supply
|
 |
- Pre plumbed factory tested
- Easy Installation
- Hinged lockable access panels
- Made to order
|
Non Clinical Utility
|
 |
This boxed out unit incorporates a non
clinical hand rinse basin and lever
operated thermostatic mixer tap for
use on single tap hole basins. The unit
is custom manufactured to project out
adjacent to solid or partition walls and
integrate into suspended ceilings while
encasing all services and waste pipes
to the rear of the panelling. |
 |
TMV3 APPROVED THERMOSTATIC DO8 TAP
HTM – DH REF LBGS TP6
|
|
Caremix Thermostatic Taps
|
Sola Medical 400
|
 |
2 tap hole 25mm – 1 tap basin 32mm
|
 |
The Caremix® S3 is a sequential D08
approved thermostatic tap for use on single
hole basins in high risk environments like
hospitals or nursing homes to prevent
vulnerable people from being scalded by
hot water. The tap is designed for ease of
operation and installation and is supplied
complete with combination valves
incorporating isolation, filtration, check valves
and flow regulators. |
- Non clinical hopsital pattern basin
- No overflow, no chainstay
- Panel mounted basin
|
 |
- Pre plumbed factory tested
- Easy installation
- Hinged lockable access panels
- Made to order
|